Various industries special welding machine
Product Introduction
Main Features:
>> Special design of the integrated pressurized cylinder, to ensure the stability and the pressure of the pressure and the speed of welding;
>> Multi channel forced water cooling system to ensure long-term operational reliability, and extend the service life of the equipment;
>> In the top and bottom electrode, the pressure mode with auxiliary stroke is adopted to improve the maximum service life of the electrode;
>> The speed of the pressure electrode can be adjusted at any time, and the impact on the pressure of the welded object is reduced, and the noise generated during the welding is reduced;
>> The two electric conduction part adopts the upper and lower insulation method, which can avoid the short circuit accident of the insulation part when the iron pin is auxiliary or the lower seat is installed and welded;
>> Transformer with low impedance design, high-quality conductive material is adopted in the secondary circuit, decrease the internal friction, small input to obtain larger welding current.
>> Operating interface using digital tube or liquid crystal display, clear, clear and intuitive;
>> Equipment full use of vibrating plate and multi station turntable automatic feeding, sorting, combination of welding and automatic unloading, automatic welding method.
Main Parameter:
DN-150 Tyre nut special welding machine | ||||
Main technical parameters | ||||
Name | Parameter | Units | Remarks | |
Rated power | 150 | KVA | ||
Rated Voltage | 380 | V | ||
Secondary maximum short-circuit current | 36 | KA | ||
Duty cycle | 20% | |||
Cable section | 50 | mm² | ||
Welding-transformer | 150 | KVA | ||
Feeding system | Divided circle | |||
Cooling mode | Water-cooling | |||
Loading mode | Vibration plate | |||
Maximum welding speed | 60 | A/min | ||
Cooling water pressure | 0.3 | Mpa | ||
Flow Rate | 4 | L/min | ||
Coolant-temperature | 0≤30 | ℃ | ||
Air pressure | 0.6 | Mpa |